UZAY
Electric Propulsion System and Engine
HALE-1500
Hall Effect Propulsion Engine
Hall Effect Propulsion Engines (HALE) are highly reliable electric propulsion engines used in satellites and spacecraft. These engines are used in satellites for orbit raising, orbit maintaining, phase maintaining and orbit termination maneuvers.
HALE-1500 Specifications
Main Features
- Up to 1,500 W rated power
- Min. 70 mN thrust
- Minimum 1,500 seconds specific impulse
- Min. 45 % efficiency
- Maximum tail throttle angle of 35 degrees (total maximum 70 degrees)
- 250-300 V anode voltage
- 3-5.5 A anode current
- 4.5 kg mass
- It can operate with Xenon, Krypton and Argon gases as fuel.
HALE-300
Hall Effect Propulsion Engine
Hall Effect Propulsion Engines (HALE) are highly reliable electric propulsion engines used in satellites and spacecraft. These engines are used in satellites for orbit raising, orbit maintaining, phase maintaining and orbit termination maneuvers.
HALE-300 Specifications
Main Features
- Rated power up to 300 W
- Min. 10 mN thrust
- Minimum 1,000 seconds specific impulse
- Min. 45 % efficiency
- Maximum tail throttle angle of 35 degrees (total maximum 70 degrees)
- 250 V anode voltage
- 0.8-1.0 A anode current
- 2 kg mass
- It can operate with Xenon, Krypton and Argon gases as fuel.
GFU
Fuel Feed Unit
It is the unit that provides gaseous fuel at constant pressure and flow rate to Hall Effect Propulsion Engines and Ion Engines used in satellites and spacecraft.
YBB Features
Main Features
- Inlet pressure between 5-150 bar
- 2.5 bar outlet pressure
- 225 bar proof test pressure
- Anode flow rate: 1-5 mg/sec.
- Cathode flow rate: 0.1-0.5 mg/sec.
- Sealing <7x10E-5 sccm GHe
- 2.8 kg mass
- Compatible with Xenon, Krypton and Argon gases.
GIKB-1500
Power Processing and Control Unit
GİKE-1500 is an independent unit compatible with the HALE-1500 Hall Effect Propulsion Engine, which can operate 2 electric propulsion engines and control the fuel supply units.
GIKB-1500 Features
Main Features
- Up to 1,750 W input power
- 250-300 V anode voltage
- 20 V cathode voltage
- 100 V bus voltage
- >90% efficiency
- 16.8 kg mass
GIKB-300
Power Processing and Control Unit
GİKB-300 is an independent unit compatible with the HALE-300 Hall Tag Propulsion Engine, which can operate 1 electric propulsion engine and control the fuel supply unit.
GIKB-300 Features
Main Features
- Up to 450 W input power
- 250 V anode voltage
- 20 V cathode voltage
- 28 V bus voltage
- >90% efficiency
- 6.5 kg mass
Fuel Tank
Power Processing and Control Unit
The Fuel Tank can be used with xenon, krypton, argon, nitrogen and helium gases. It has a titanium body to minimize the leakage rate and a composite winding coating for mechanical durability.
Fuel Tank Specifications
Main Features
- 150 bar maximum working pressure
- 225 bar proof test pressure
- 700 bar burst pressure
- Volume 8.1 liters
- Structure: Titanium body, composite winding
- Dry mass 4 kg
- Compatible with Xenon, Krypton, Argon, Nitrogen and Helium gases.